1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

EQUIPMENT DETAILS Fans Supply, Exhaust, Return - Belt or Shaft Driven Roof Ventilator

Discussion in 'HVAC' started by Mannan, May 24, 2016.

  1. Mannan

    Mannan Administrator Staff Member



    [​IMG]

    [​IMG]


    الحمد لله والصلاة والسلام على رسول الله وعلى آله وصحبه أجمعين


    EQUIPMENT DETAILS Fans Supply, Exhaust, Return - Belt or Shaft Driven

    SCHEDULE OF PLANNED PREVENTIVE MAINTENANCE Work Plan


    [​IMG]

    EQUIPMENT DETAILS Supply, Exhaust, Return - Belt or Shaft Driven

    صيانة دورية جداول جاهزة مروحة الهواء الجديد و الطرد و الراجع

    Capacity
    Qty: Lot
    Make & Model

    Location

    Roof Ventilator Units

    Consumable Spare Parts

    Task Description
    W / Weekly M / Monthly Q / Quarterly SA/ Semi/Annually
    A/ Annually SST / Seasonal Start/Up SSH / Season Shut Down
    2W M 3M
    6M A Notes

    Item Description
    Qty Notes

    Inspect unit for unusual noise and/or vibration, ensure that it is in good working order.
    If unit is not running or an identified problem requires the unit to be serviced, perform


    If present, inspect belts for proper tension and wear (if belts are replaced, record belt type and
    replacement date on unit)

    Inspect fan and motor assemble for proper alignment.
    Provide lubrication, if necessary.
    Clean entire unit, motor and fan assembly with a damp cloth.
    Check exhaust fan intake grills for dirt/debris.
    Other recommended tasks
    For fans 2HP or more, check load amps.
    Inspect fan and motor pulleys for proper alignment.
    Inspect fan blades and moving parts for excessive wear.
    Inspect all fan wiring for deterioration.
    Ensure tightness of all electrical connections.
    Inspect motor starter/control center.
    Ensure that overload settings are proper
    Verify correct operation of starter.
    Inspect electrical contact surfaces.
    Inspect fan assembly.
    Verify tightness of balance weights.
    Check the operation.

    Check the bearings and grease , if necessary

    Lubricate hood damper

    Clean the blades

    Clean the hoods

    Grease / oil the bearings


    Notes
    Use additional sheets if required
    PPM routines based on Complete
    Running hour where recommended by the Manufacturer


    [​IMG]

    http://www.sitei.net/up/do.php?id=33


    في أمان الله !


    [​IMG]

     

    Attached Files:


Share This Page